Add a secondary building to a customer in CleanGuru so a client with more than one site has each location on its own record, with its own address and contact.

Select a Customer

1

Open Customers

Click Customers in the top navigation bar.

2

Select the customer

Use the Select Existing dropdown to open that customer’s profile.

Select Existing dropdown listing commercial-active customers including Matero Plus Products
The Select Existing dropdown lists the customers you can open, grouped by type.

Access Building Management

3

Open the Buildings tab

Scroll to the bottom left of the profile and click Buildings.

4

Check what is already there

The table lists each building with its Address, City, Contact and Phone 1. The customer’s existing building is already in it.

Buildings tab of a customer record listing one building, with the New Building link at the right of the table header
Notes and Buildings sit as a pair of tabs at the bottom of the profile. The New Building link is at the right-hand end of the table header.

Add a Building

5

Click New Building

The New Building link sits at the right-hand end of the Buildings table header.

6

Name the building and enter its address

In the Add Building window, type a name in the Building field, then fill in Street, City, State and Zip.

Empty Add Building window with Address, Phone/Fax, Primary Contact and Additional Contact sections
The Add Building window opens empty, with the Building name at the top and Address, Phone/Fax, Primary Contact and Additional Contact below.
7

Add the site contact

Enter the Primary Contact — first name, last name, title and email — and the building’s phone numbers. There is an Additional Contact block for a second person.

Add Building window filled in for the Wauseon Plant with its street address, phone number and plant manager
Enter the site’s own contact under Primary Contact, and its numbers under Phone/Fax.
8

Save the building

Click the green Add button at the bottom left of the window.

Completed Add Building window with the pointer resting on the green Add button
Click the green Add button to save the building.

Verify the Profile

9

Check the list

The new building appears in the Buildings table beneath the first one.

Buildings table listing two locations, with the new Wauseon Plant row outlined in red
The Buildings table now lists both locations.

FAQ

Open the customer’s profile and click the Buildings tab at the bottom left.
One row per location, with Building, Address, City, Contact and Phone 1.
A Building name, the Street, City, State and Zip, up to three Phone/Fax numbers, a Primary Contact and an Additional Contact.
In the Buildings table on the customer’s profile, beneath the one that was already there.
It is ready to use for scheduling and inspections.