Inspections in CleanGuru start from a template. Build the template from a bid you have already done, put it on a schedule, and your supervisors carry out the inspection on their phone. This walks through the whole loop, from creating the template to reading the results.

Create the Template

1

Open the Templates list

Click Inspections in the top menu, then click the Templates tab underneath it.

2

Start a new template

Click the green New Template button.

3

Pick the customer and the source

In the Create Template box, choose who the template is for — the list is sorted by customer, with that customer’s buildings underneath each one. Then set Source. Bid brings across the areas from a bid you have already done, along with the things commonly checked in each of those areas. If you have not bid the building yet, pick Building Type instead.

Create Template box with the customer list open, each customer's buildings indented beneath
The Create Template box lists customers, with each customer’s buildings underneath.
4

Name it and create it

Give the template a name you will recognize later, such as Monthly Inspection, Pevelli Tiffin, then click Create. CleanGuru opens the new template straight away.

Put It on a Schedule

5

Set it to Scheduled

Change the status from Unscheduled to Scheduled. The frequency, Start and End boxes appear beside it. Pick how often the inspection should happen — Yearly, Quarterly, Monthly, Weekly, Daily or Every… — and set the start date.

Inspection template set to Scheduled and Yearly, with Start, End and Time fields
Setting the template to Scheduled reveals the frequency, Start and End boxes.
6

Save the template

Click Save. CleanGuru says Inspections Created! — click OK, and the inspection dates appear at the bottom of the page.

Inspections Created confirmation, with the four scheduled dates outlined in red below
After you click Save, CleanGuru confirms with Inspections Created! and lists the dates at the bottom.

You do not have to put a template on a schedule. Leave it Unscheduled and it sits ready to use: an inspector out in the field can tap the inspection template in the mobile app and create an inspection on the spot.

Inspect on Site

7

Rate each item

Open the inspection in the CleanGuru mobile app and work through the areas. For each item — Glass, here — pick a rating: Very Good, Average, Poor or N/A. The pencil adds a comment and the camera adds a photo.

Mobile inspection rating a Glass item, offering Very Good, Average, Poor and N/A
Each item is rated Very Good, Average, Poor or N/A, with a pencil for a comment and a camera for a photo.
8

Watch the scores

The Areas tab shows a score for each area as you work through it, and the figure in the top right is the average score for the whole building so far.

Mobile Areas tab with a score on each area, Entrances at 94 percent and the building at 97
Each area carries its own score, and the figure in the top right is the building’s average so far.

Finish the Inspection

9

Collect the signatures

Tap the Sign tab and capture signatures from the Inspector, Cleaner or Customer, as your company requires.

Mobile Sign tab offering Inspector, Cleaner and Customer signatures
The Sign tab captures signatures from the inspector, cleaner or customer.
10

Mark it completed

Go back to the Info tab and change Status to Completed. CleanGuru works out the final score.

Mobile Info tab with the status Completed, 0 deficiencies and a 97 percent performance review
Once the status is Completed, the screen shows the deficiency count and the performance review score.
11

Send the inspection

Tap Email at the top of the screen to send a PDF copy of the inspection to your customer or your own team.

See the Results

12

Follow up on the deficiencies

The Create Ticket button shows how many items were rated at a level your rating scale marks as deficient — five, here. Tap it to raise a ticket for them.

13

Read the performance review

Tap Performance Review for a breakdown of the score by area and a trend line of past inspections for that building.

Performance review page with a goal-by-area bar chart, the best areas listed and a score history line
The performance review breaks the score down by area and plots past inspections for the building.

FAQ

Yes. Open the template and use the Add Area button on the left sidebar.
They set the inspection score, and any item rated at a deficient level is what a ticket can be raised from. Which level counts as deficient is set on your rating scale in Settings.
Only if you send it to them. Tap Email on the finished inspection to send them the PDF.